Future Glue® Super Glue Gel
Product Legal Information:
High-Performance Professional Future Glue® Super Glue Gel is the ultimate solution for all your bonding needs, especially in challenging conditions. This versatile superglue gel offers exceptional performance with vertical applications and gap-filling capabilities. Its powerful adhesive formula works on dirty and greasy surfaces, eliminating the need for pre-cleaning. With instant bonding power, Future Glue is suitable for almost all porous and non-porous materials, providing a reliable hold that withstands high and low temperatures as well as most chemicals. The convenient single-use tubes ensure freshness and prevent waste, making Future Glue the ideal choice for both professional and everyday use.
• Surface insensitive - bonds to dirty and oily surfaces
• High chemical and temperature resistance - From -65°F to +180°F
• Instant bond in 15 seconds
DIRECTIONS:
Each tube is single-use only.
1. Protect clothing and work surfaces (aluminum foil works well) and use in well-ventilated area.
2. To puncture, screw nozzle and cap assembly onto the tube completely. POINT TUBE AWAY FROM FACE AND BODY. DO NOT SQUEEZE TUBE WHILE PUNCTURING.
3. Apply glue sparingly (one drop per square inch) to one surface only. For optimum bonding, surfaces should be clean, dry & mate well.
4. Do not spread glue with fingers. Use applicator nozzle tip.
5. Press pieces together for 15 seconds or until set.
6. Throw tube away after use.
FOR BEST RESULTS:
1. Do not apply product excessively. Clean the extra product, if possible, with a spatula or absorbent paper.
2. For glass and crystal applications, test it first.
KEEP THE INSTRUCTIONS UNTIL THE PRODUCT IS FINISHED.
SKIN/FINGERS BONDED?
Soak in warm soapy water and peel/roll skin apart.
DO NOT PULL. Repeat as necessary. If over-exposure occurs call your poison control center at 1-800-222-1222.
For other info: (909) 987-0550.
Contains Ethyl Cyanoacrylate. Skin contact through clothing may cause burns. If spilled on clothing, flush with water immediately, do not remove, contact a physician. For accidental eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in warm soapy water and gently peel adhesive off with fingernail; water exposure will wear off residual adhesive within a few days.
KEEP OUT OF REACH OF CHILDREN.
Contiene Ethyl de Cianoacrilato. El contacto con la piel a través de la ropa puede causar quemaduras. Si se derrama sobre la ropa, enjuague con agua inmediatamente, no lo quite, Ilame a un médico. En caso de contacto accidental con los ojos, enjuagar con agua durante 15 minutos; buscar atención médica en caso de contacto con los ojos o ingesta. Para quitarlo de la piel, sumergirlo en agua jabonosa tibia y retirar el adhesivo suavemente con la uña; la exposición al agua eliminará el adhesivo residual en pocos días.
MANTENER FUERA DEL ALCANCE DE LOS NIÑOS.
*Not suitable for Polyethylene (PE), Polypropylene (PP), and PTFE. Not recommended for bonding parts that are subject to great shock or immersion in water. Avoid contact with fabric and foam materials. Do not use for reattaching rearview mirror to windshield. Performance may vary due to materials and conditions. It is the user's responsibility to determine the suitability of the product for the proposed use.
Metal tubes are non-recyclable.
Pacer Technology
Rancho Cucamonga, CA 91730 USA
(800) 538-3091
www.supergluecorp.com
©Pacer Technology 2023
Made in Taiwan.
© 2026 Copyright of The Original SuperGlue Corporation. All Rights Reserved.
